Ivan

Amplifier Section Rated Output Power (FTC) (North American) With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 80 watts per channel minimum RMS power, with no more than 0.08% total...

Supported Audio Formats 2 ch linear PCM:32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit Multi-channel linear PCM:Maximum 7.1 channels, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kH...

Compatible functionsHDMI (High Definition Multimedia Interface) is a digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, digital tuners, and other video components....

Unplug and plug the power cord of the unit, or turn off and on the BLUETOOTH-enabled device. Restart of the BLUETOOTH-enabled device may be effective. BLUETOOTH-enabled devices must support the A2...

❏ HDMI linked operation does not work with CEC-compliant devices, such as a TV In the Setup menu of the unit, set "6. Hardware" - "HDMI" - "HDMI CEC" to "On". It is also necessary to set HDMI link...

Confirm that the connection between the output jack on the connected device and the input jack on this unit is correct. Make sure that none of the connecting cables are bent, twisted, or damaged. ...

To enjoy digital surround playback in formats such as Dolby Digital, you need to make a connection for audio signals with an HDMI cable, digital coaxial cable or digital optical cable. Also, audio...

Make sure that the speaker setup microphone is no longer connected. Confirm that the connection between the output jack on the connected device and the input jack on this unit is correct. Make sur...

❏ When the power is turned on, "AMP Diag Mode" appears on the display of the main unit. • The protection circuit function may have operated. If the unit suddenly enters the standby state and "AMP D...

❏ Try restarting the unit Restarting this unit may solve the problem. After turning the unit to standby mode, press and hold the STANDBY/ON button of the main unit for at least 5 seconds, and then...