Travis

U.S. Support Line 844-679-5350 HoursMonday – Friday 9am to 5pm EST    

Updating of Listening Modes Listening modes such as Atoms 2.0 and DSur 2.0 are added when the firmware is updated after purchase or the firmware is switched in the product production process. For d...

See the following table for selectable listening modes for each speaker layout.

You can change the listening mode during play by pressing repeatedly "AUTO/DIRECT", "SURR", or "STEREO". Each of AUTO/DIRECT, SURR, and STEREO buttons stores the listening mode that was selected l...

You can allow the unit to enter standby automatically when the specified time has elapsed. Press SLEEP button on the remote controller to select the time from "30 min", "60 min" and "90 min". "Off...

You can adjust the sound quality of the speakers. Adjusting TREBLE/BASS You can adjust the sound quality of the speakers. Press TONE repeatedly to select Treble or Bass and adjust the content.Tre...

You can register settings such as the current input selector and listening mode with the three PERSONAL PRESET buttons, and call a registered setting in a single operation.    EXAMPLE: Pressing the...

While performing playback in the main room (ZONE A), you can enjoy the audio of the same source in the separate room (ZONE B) at the same time. Press ZONE A/B to select an audio output destinatio...

RDS stands for Radio Data System, and is a method of transmitting data in FM radio signals. In regions where RDS can be used, when you tune in to a radio station broadcasting program information, t...

You can preset up to 40 of your favorite AM/FM radio stations. After tuning in to the AM/FM radio station you want to register, perform the following procedure.  Press +Fav so that the preset num...