HTP-071 - Crossover Network Menu

NOTE: Default setting: 200Hz

This setting decides the cutoff between bass sounds playing back from the speakers selected as LARGE, or the subwoofer, and bass sounds playing back from those selected as SMALL. It also decides where the cutoff will be for bass sounds in the LFE channel.

For more on selecting the speaker sizes, see this article - HTP-071 - Speaker Setup Menu

1. Use to select ‘SP SETUP’ from the System Setup menu, then press ENTER.
2. Use to select ‘X.OVER’ from the SP SETUP menu, then press ENTER.
3. Use to select the frequency cutoff point.
   Frequencies below the cutoff point will be sent to the subwoofer (or LARGE speakers).
4. When you’re finished, press RETURN. You return to the Speaker Setup menu.