HTP-076 - Menu - Source

Input Volume Absorber

Adjust the volume level when there are differences in volume level among multiple devices connected to this unit. Select the input selector to make the setting.

Input Volume Absorber

Default Value: 0.0 dB

Setting Details

Select a value between "-12.0 dB" and "+12.0 dB".  Set a negative value if the volume of the target
device is larger than the others and a positive value if smaller. To check the audio, play back the
connected device.

• This function does not work in Zone B.

 

Name Edit

Default Value: Input Name

Setting Details

1. Select a character or symbol with the cursors, and press ENTER.
   
   Repeat this operation to input up to 10 characters.
   
   "A/a": Switches between upper and lower cases.  (Pressing MODE on the remote controller also
   toggles between upper and lower cases)
   "←" "→": Moves the cursor in the arrow direction.
   " ": Removes a character on the left of the cursor.
   "Space": Enters a space.
   
   • Pressing CLEAR on the remote controller will remove all the input characters.
   
   
2. After inputting, select "OK" with the cursors, and press ENTER.
   The input name will be saved.
   
   To restore the name to the default value, press CLEAR on the remote controller on the input
   screen. Then while nothing is entered, select "OK", and press ENTER.

• To name a preset radio station, press TUNER on the remote controller, select AM/FM, and select the preset number.
• This cannot be set if the "BLUETOOTH" input is selected.

Audio Select

Select the priority for input selection when multiple audio sources are connected to one input selector. The setting can be separately set to each input selector.  Select the input selector to make the setting. Note that some of the default values
cannot be changed.

Audio Select

Default Value:

BD/DVD:HDMI

GAME:HDMI

CBL/SAT:HDMI

STRM BOX:HDMI

CD:COAXIAL

TV:OPTICAL

Setting Details

"ARC": When giving priority to the input signal from ARC-compatible TV.

• This item can be selected only when "5. Hardware" - "HDMI" - "Audio Return Channel"
  is set to "On" and also the "TV" input is selected.
  
  "HDMI": When giving priority to the input signal from HDMI IN jacks
  
  
• This item can be selected only when the input to be set is assigned to the HDMI jack in the
  "1. Input/Output Assign" - "HDMI Input" setting.
  
  "COAXIAL": When giving priority to the input signal from DIGITAL IN COAXIAL jacks
  
  
• This item can be selected only when the input to be set is assigned to the COAXIAL jack in the
  "1. Input/Output Assign" - "Digital Audio Input" setting.
  
  "OPTICAL": When giving priority to the input signal from DIGITAL IN OPTICAL jacks
  
  
• This item can be selected only when the input to be set is assigned to the OPTICAL jack in the
  "1. Input/Output Assign" - "Digital Audio Input" setting.
  
  "Analog": When giving priority to the input signal from AUDIO IN jacks
  
  
• This item can be selected only when the input to be set is assigned to the AUDIO IN jack in the
  "1. Input/Output Assign" - "Analog Audio Input" setting.

Fixed PCM

Default Value: Off

Setting Details

Select whether to fix input signals to PCM (except multi-channel PCM) when you select "HDMI",
"COAXIAL", or "OPTICAL" in the "Audio Select" setting. Set this item to "On" if noise is produced or truncation occurs at the beginning of a track when playing PCM sources. Select "Off" normally.

• Each time the "Audio Select" setting is changed, the setting is restored to "Off".

• The setting cannot be changed when "TUNER" or "BLUETOOTH" input is selected.