Dual Mono / Mono
Change the settings of multiplex audio playback.
Dual Mono
Default Value: Main
Setting Details
Set the audio channel or language to be output when playing multiplex audio or multilingual
broadcasts, etc.
"Main": Main channel only
"Sub": Sub channel only
"Main/Sub": Main and sub channels are output at the same time.
- For multiplex audio broadcasts, pressing the button on the remote controller will display "1+1"
on the main unit’s display.
Mono Input Channel
Default Value: Left + Right
Setting Details
Set the input channel to play 2-ch digital sources such as Dolby Digital, or 2-ch analog/PCM sources
in the Mono listening mode.
"Left": Left channel only
"Right": Right channel only
"Left + Right": Left and right channels
Dolby
Change the setting of when Dolby signals are input.
Loudness Management
Default Value: On
Setting Details
When playing Dolby TrueHD, enable the dialog normalization function which keeps the volume of
dialog at a certain level. Note that when this setting is Off, the Midnight function that allows you to enjoy
surround at low volumes is fixed to off when playing Dolby Digital Plus/Dolby TrueHD.
"On": When this function is used
"Off": When this function is not used
DTS
Default Value: 0 dB
Setting Details
You can increase the volume of dialog portion of the audio up to 6 dB by 1 dB step so that you can
hear the dialog easily in noisy atmosphere.
- This cannot be set for content other than DTS:X.
- Depending on the content, this function may not be selected.
Volume
Change the Volume settings.
Mute Level
Default Value:-∞ dB
Setting Details
Set the volume lowered from the listening volume when muting is on. Select a value from "-∞ dB", "-40 dB" and "-20 dB".
Volume Limit
Default Value: Off
Setting Details
Set the maximum value to prevent the volume from becoming too loud. Select a value from "Off", "-32 dB" to "+17 dB".
Power On Volume
Default Value: Last
Setting Details
Set the volume level of when the power is turned on. Select a value from "Last" (Volume level before
entering standby mode), "-∞ dB", and "-81.5 dB" to "+18.0 dB".
- You cannot set a higher value than that of "Volume Limit".
Headphone Level
Default Value: 0.0 dB
Setting Details
Adjust the output level of headphones. Select a value between "-12.0 dB" and "+12.0 dB".
Comments
0 comments
Please sign in to leave a comment.