Turning On CD Player
To turn on the CD Player, press the [STANDBY/ON] button on the unit or the remote controller. Press the [STANDBY/ON] button again to set the CD Player to Standby
Setting Auto Standby (ASb)
You can specify that if the CD Player is left stopped for 30 minutes, the power will automatically turn off,
placing the unit in Standby mode (Auto Standby function).
On the North American model:
The default setting is “Off”.
On the European model:
The default setting is “On”.
Make settings for this function while playback is stopped.
- Press the [SETUP] button.
- Use the or button to display “ASb”; then press the [ ENTER ] button.
- Use the or button to switch “Off” or “On”; then press the [ ENTER ] button.
- “COMPLETE” appears on the display.
If playback is paused, the power will remain on even after 30 minutes have elapsed; the Auto Standby function will not operate.
Changing the Display Brightness
Press the remote controller’s [DIMMER] button repeatedly to select the following options:
Turn down the volume, then connect your stereo headphones to the [PHONES] jack.
You can adjust the volume by using the [PHONES LEVEL] knob.